– OEAG Schematics –
Watch the video below.
In the video, you will see the schematics for the Mark I: Overidon Entropic Absorption Generator (OEAG).
Also, in the video there are several flybys of the OEAG core. An expanded view takes place at around the 10 second mark which really lets the viewer see into the core.
If you are new to the posts on this subject, check out the OEAG category of posts.
Current focus here at overidon is using 3D printers to finalize the vanes. First we’re going to make them in plastic and then we’re going to make them in steel.
The glass section is already complete but the larger ring to create the pressure seal will need to be made using 3D printers as well. But since the primary rotor assembly is complete, the first 3D printed model will be the vanes. This will allow us to have a follow up series of videos which will document the construction and innovation process of the OEAG as it is physically constructed in our physical space.